Skip to main content
The styling sections of the properties panel set how a layer looks: its fills, borders, shadows, filters and masks. Each one is a CSS property, so the layer looks the same in code. Before you start · Web and desktop · Free plan Frames and text layers get every section on this page. SVGs get a Colors section instead of fills and have no border, shadow, filter or mask. An image on the canvas is a frame with an image fill, so it gets the frame sections. Fills, shadows, filters and masks can each hold several entries. Click + in a section’s header (or click the heading of an empty section) to add one, drag entries to reorder them, click the eye to hide one, and click the remove button to delete it.

Set opacity, blend mode and corner radius

The Appearance section holds:
  • Opacity: from 0 to 100%.
  • Blend mode: the button in the section header. Hover an option to preview it on the canvas. The options are Normal, Darken, Multiply, Plus darker, Color burn, Lighten, Screen, Plus lighter, Color dodge, Overlay, Soft light, Hard light, Difference, Exclusion, Hue, Saturation, Color and Luminosity.
  • Corner radius: rounds the corners. Click All corners to set Top left radius, Top right radius, Bottom right radius and Bottom left radius one by one.
  • Clip content: hides any part of the children that falls outside the layer.
The eye in the header hides or shows the layer.

Add a fill

The Background Fill section holds a layer’s fills. Text layers also have Text Fill, which colors the text itself.
  1. Click Add fill.
  2. Click the swatch to open the fill picker.
  3. Pick a fill type: Solid, Gradient or Image. Text Fill has Solid and Gradient only.
A layer can have several fills stacked on top of each other, like CSS backgrounds. The first background fill you add is white; later ones are black at 20% so you can see the one underneath. To turn a fill into an animated shader, click Shader mode in the section header. See Shaders.

Edit a gradient

In the fill picker, choose Gradient, then pick Linear, Radial or Conic from the Gradient type menu.
  • Click the stop slider to add a stop. Right-click a stop for Delete stop and Redistribute stops.
  • Set each stop’s color and Stop position, or click Add Stop.
  • Rotate 90° and Reverse gradient stops sit next to the type menu.
  • For Radial, set Radial shape (Circle or Ellipse) and Radial extent.
While the picker is open, with one layer selected, the gradient’s handles appear on the canvas:
  • Linear: drag the end points to change the direction and length. Hover just outside an end point and drag to rotate; hold ⇧ to snap to 15°.
  • Conic: drag the spoke to change the angle.
  • Radial: drag the handles to change the size.
  • Drag a stop’s dot to move it, or click the line to add a stop.

Add an image fill

  1. In the fill picker, choose Image.
  2. Click Upload image (PNG, JPEG, SVG, GIF or WebP), drop a file on the picker, or click Select on canvas and click a layer.
  3. Pick how the image fits with Image fit:
To swap the image, hover it in the picker and click Replace.

Pick a color

The color picker opens from any color swatch.
  • Switch between sRGB and Display P3 at the top. In sRGB, the format menu offers Hex, RGB, HSL and OKLCH; in Display P3, Display P3 and OKLCH.
  • Type the color’s opacity in the A field, or use the opacity slider.
  • Copy color value copies the color as text.
  • The Variables tab lists your color variables. See Variables.
To pick a color from the screen, click Pick color, or press I. Pressing I on the canvas sets the selected layer’s fill (or a text layer’s color) to the color you click. With nothing selected, it copies the color’s hex to your clipboard. The eyedropper uses your browser’s eyedropper. In browsers without one, such as Safari and Firefox, it does nothing; use the desktop app or Chrome.

Add a border or an outline

Border draws a line along the layer’s edges.
  1. Click Add border. It starts as a 1 px black solid line.
  2. Set Border width, the color, and the style in the section header: Solid, Dashed or Dotted.
  3. To give each side its own width or color, click Individual sides and pick Top, Right, Bottom or Left under Border side.
Outline draws a line around all four sides of the layer, like CSS outline. Click Add outline, then set Outline width, the color, the style and Outline offset, which moves the line further out (or in, with a negative value). A layer has one outline. ⇧ X (Swap fill and border) swaps the two colors, ⌥ / runs Remove fill, and ⇧ / runs Remove border.

Add a shadow

  1. In the Shadow section, click Add shadow.
  2. Click the shadow to open its settings and pick a type:
    • Box: a shadow around the layer’s box. Check Inner shadow to draw it inside the edges.
    • Drop: a shadow that follows the shape of what’s visible, including transparent areas of an image.
    • Text: a shadow behind the letters, for selections with text.
  3. Drag in the preview to set the offset, or type X, Y, Blur and, for box shadows, Spread.
New shadows start 4 px down with a 4 px blur, in black at 25%.

Add filters and backdrop blur

Filters change how a layer is drawn. Click Add filter, then pick a type: Blur, Brightness, Contrast, Grayscale, Hue rotation, Invert, Saturate or Sepia. Hover a type to preview it. Each type is listed twice in the menu:
  • Under Layer, it applies to the layer and its content.
  • Under Backdrop, it applies to whatever is behind the layer.
For a frosted-glass effect, add a filter, choose Blur under Backdrop, and give the layer a semi-transparent fill.

Masks

A mask fades or cuts out parts of a layer. In the Mask section, click Add mask. The new mask fades the layer out toward the bottom. Click the mask to change it:
  • Mask type: Linear, Radial or Conic.
  • The fade slider works like a gradient’s: click to add a stop, set each stop’s Alpha, and right-click a stop to delete it.
  • Rotation turns a linear or conic mask.
  • Invert swaps what shows and what’s hidden.
  • Advanced has Mode, Repeat, Composite (with two or more masks), Position and Size.
While the mask is open, its handles appear on the canvas, like a gradient’s.

Use a layer as a mask

To clip layers to the shape of another one:
  1. Select the layers and the frame you want as the mask. They must share a parent, the mask must be the bottom-most of them, and none can be rotated.
  2. Right-click and choose Use as mask, or run it from the command menu (⌘ K).
The layers above are clipped to the bottom frame’s shape, rounded corners included, or to its image. Right-click a masked layer to Detach mask as shape (turn the mask back into a layer) or Remove mask.

Recolor a selection

The Selection colors section lists every color used inside the selection: fills, gradient stops, text colors, borders, outlines, shadows and colors inside SVGs. It shows when you select several layers, or a frame whose children have colors.
  • Change a color there to change it everywhere in the selection at once. Each change is one undo step.
  • Bind it to a color variable from the picker’s Variables tab.
  • Click Select layers with this color to select the layers that use it.
After ten colors, click Show all colors to see the rest.

If something goes wrong

  • I can’t find the border, shadow or filter sections. They’re for frames and text. An SVG has a Colors section instead. On a component instance, only opacity and visibility can be changed here.
  • Add fill is greyed out. The fill is in shader mode. Click Disable shader in the section header first.
  • Pressing I does nothing. Your browser has no eyedropper. Use the desktop app or a Chromium browser such as Chrome.
  • Use as mask isn’t in the menu. Select at least two layers with the same parent, none rotated, with a frame at the bottom.
  • Gradient handles don’t show on the canvas. Select only one layer, open its gradient in the fill picker, and zoom in until the layer is at least 48 px on screen.